The boardrooms on floors 3 and 4 each have a wall mounted display. Below are the instructions for using these screens.
Floor 4 Boardroom
In this room there should always be the following:
- A Samsung TV Remote
- A HDMI Switch Remote
- A USB Presentation Remote
- A DisplayPort Cable
- A HDMI Cable
When turning the screen on you should make sure that the source is set to HDMI 1. This should never be changed, but if it is you will need to use the source button on the Samsung remote to select it.
All company issued laptops should have either a DisplayPort or HDMI connector on them. Plug in the required cable and the HDMI Switch will automatically connect to the screen. If in doubt, please see a member of IT.
Floor 3 Boardroom
This room is mostly the same as the above and should always have the following:
- A Samsung TV Remote
- A DisplayPort Cable
- A HDMI Cable
The only difference between floors 3 and 4 is that floor 3 doesn't currently have a HDMI switch, so you may need to manually swap cables over when connecting. All company laptops should have a DisplayPort or HDMI connector. This screen should always have the source set to HDMI 1.
If you find that your device has neither a HDMI or DisplayPort connector please contact the IT Service Desk.